.
.
.
NEW NEW NEW !
WM-01
The WM-O1 is the First and Only Wiegand Meter available to date. The WM-01 is a touch screen Wiegand Meter, it can Capture Wiegand signals, Send Wiegand Signals (13 card formats), Capture RS232 Signals, & Send RS232 signals .
CV800
The CV800 is a Serial to Wiegand Converter. The CV800 captures Serial data from the Intercom RS232 Port and converts this to a Wiegand Card number and Facility Code
The CV800-SES Interfaces to the SES TEC, & CAT Telephone Entry Panels.
The CV800-SES1A Interfaces to the SES TEC1A Telephone Entry Panel.
The CV800-EP Interfaces to the IDENTIV Series of Telephone Entry Panels.
WIE-SPLIT12
Our Wie-Split12 is a universal Wiegand Splitter. It takes the incoming Wiegand data from any Wiegand device (max 64Bits) and outputs this data out the two(2) Wiegand Out Ports. It may be connected up to 300 feet from the Wiegand source.
WIE-SPLIT12(KSC)
The WIE-SPLIT12(KSC) is a Wiegand Splitter that Converts any Standard 26Bit Wiegand Signal to Keyscan 36Bit Wiegand with a Facility code 255. The WIE-SPLIT12(KSC) has Two(2) Wiegand Outputs.
WIE-SPLIT14(KSC)
The WIE-SPLIT14(KSC) is a Wiegand Splitter that Converts any Standard 26Bit Wiegand Signal to Keyscan 36Bit Wiegand with a Facility code 255. The WIE-SPLIT14(KSC) has Four(4) Wiegand Outputs.
EAS-485CON
The EAS-485CON is an RS232 to RS485 Converter, It has Auto Baud detection between 9600 & 115200 Baud. It is a Plug and Play device, There are no User Settings.
WEX-KIT
The WEX-KIT is a universal Wiegand extender (max64 bits). It consists of two(2) modules, the WEXi (wiegand input module) andthe WEXo (wiegand output module). These Modules are designed to extend the standard Wiegand cable distance maximum up to 4000 ft(1200m) using a proprietary RS485 protocol Communication between them
